Huawei P10 is Huawei flagship for 2017. It is very compact smartphone with many interesting features. There is second generation Leica dual camera and powerfull Kirin 960. Phone has 4 GB operating memory and 64 GB internal storage. Phone come with Android 7.0 Nougat and EMUI 5.1 from factory. In this article i will show you how to install newest firmware for this phone (for versions VTR-L09 and VTR-L29).

1. unlock bootloader of your smarthpone
2. download specific firmware for your Huawei P10 (single or dual SIM version)
2a. for single SIM VTR-L09 version download this three files - link1, link2, link3
2b. for dual SIM VTR-L29 version download this three files - link1, link2, link3
3. rename to and second file to, don't change name of
4. download the Huawei P10 updater tool to your desktop and extract downloaded file
5. after downloading and renaming the update files provided above, copy them over to update folder in Huawei P10 updater tool

6. unplug the USB cable and power your device off. Then, reboot into fastboot by reinserting the USB cable while simultaneously holding the Volume Down key
7. open the HWOTA folder you extracted on your desktop (step 3) and open the internal_update.bat file as administrator than press enter to continue (if you are not running on Europe C432 firmware now, than open the internal_rebrand.bat, most of steps will be similar, but there will be totally two updates so it take longer time
8. next the script will automatically replace your phone’s recovery and ask you to reboot into TWRP mode so disconnect the USB cable, hold the Power key to turn the phone off and then hold Volume up + Power for a few seconds to enter TWRP mode
9. once you’ve entered TWRP recovery, connect the USB cable to your phone again, wait for a couple of seconds and then press the Enter key twice on your computer
10. our phone will reboot into its recovery mode and start installing the update which can take a few minutes to complete